1- Baniasadi, Mona, Mahsa Baghban Salehi, and Hossein Baniasadi. “A conductive and thixotropic dual-network hydrogel based on Alyssum campestre seed gum and Matricaria chamomilla L. extract.” RSC advances (2026). https://doi.org/10.1039/d6ra05964c

2- Jafarzadeh, Ehsan, Farzin Saghandali, Mahsa Baghban Salehi, Hamid Reza Mortaheb, and Vahid Taghikhani. “Synergistic biosurfactant-integrated hydrogels mitigate washout for sustainable enhanced oil recovery in harsh carbonates.” Scientific Reports (2026). https://doi.org/10.1038/s41598-026-61310-2

3- Kazemi Kia, Anahita, Mahyar Moemeni, Ali Asghar Nozaeim, Hamid Reza Mortaheb, and Mahsa Baghban Salehi. “A Comparative Study of Lithium Carbonate Precipitation in Chloride and Sulfate Environments.” Journal of Sustainable Metallurgy 12, no. 3(2026):2980-2995. https://doi.org/10.1007/s40831-026-01494-z

4- Moghaddam, Homa Etemadi, and Mahsa Baghban Salehi. “Self-Healing and pH-Responsive Agar/κ-Carrageenan Hydrogels for Dynamic Burn Wound Dressings:

Conventional versus Microwave-Assisted Synthesis.” Materials Today Communications (2026): 115841. https://doi.org/10.1016/j.mtcomm.2026.115841

5- Gholami Saravi, Hediyeh, Farzin Saghandali, Ahmad Dadvand Koohi, and Mahsa Baghban Salehi. “Hydrogel-based controlled-release fertilizers: a step towards sustainable agriculture.” Iranian Polymer Journal (2026): 1-40.

6- Harighi, Hooman, Anahita Kazemi Kia, Mahsa Baghban Salehi, and Hamid Reza Mortaheb. “Dual-Function Carboxymethyl Cellulose Hydrogel for Soil Moisture/Fertilizer Control: Agrochemical Loading and Release study on pH-Responsive platform.” Journal of Environmental Chemical Engineering (2026): 121130.

7- Khademi, F., M. Baghban Salehi, H. R. Mortaheb, and S. H. Ahmadi. “Development of Chitosan-Graphene Oxide Nanocomposite Hydrogel for Adsorption and Recovery of Platinum from Aqueous Solutions.” Iranian Chemical Engineering Journal 25, no. 145 (2026): 68-83.

8- Mousavi Moghadam, Asefe, Mahsa Baghban Salehi, Sedigheh Mahdavi, and Khosro Jarrahian. “Sustainable solutions: the role of gel-based adsorbents in CO2 capture.” Environmental Technology Reviews 14, no. 1 (2026): 951-964.

9- M. Baniasadi, M.B. Salehi and H. Baniasadi, “Acrylamide/Alyssum campestre seed gum hydrogels enhanced with titanium carbide: Rheological insights for cardiac tissue engineering.” International Journal of Biological Macromolecules 293 (2025): 139240. https://doi.org/10.1016/j.ijbiomac.2024.139240

10- Hajiahmadi, Shiva, Mona Baniasadi, Mahsa Baghban Salehi, and Ahmad Dadvand Koohi. “Dual-Function Chitosan–Pyrrole Aerogel: Efficient adsorption of Vanadium (V) from wastewater and its Conversion to vanadium pentoxide catalyst.” Journal of Industrial and Engineering Chemistry (2025). https://doi.org/10.1016/j.jiec.2025.10.023

11- Firouz, Maedeh Mohammadi, Mahsa Baghban Salehi, Mona Baniasadi, and Babak Mokhtarani. “Artemisia ciniformis-enhanced multifunctional hydrogel with ionic conductivity and anti-freezing properties for wearable strain sensors.” International Journal of Biological Macromolecules (2025): 147892.

12- Saghandali, Fardin, Mahsa Baghban Salehi, Saghandali, Farzin, Vahid Taghikhani, “Enhancing P(AM-co-AA) Hydrogel Performance: Dual Crosslinking Effects on Structural Strength, Thermal Stability, Swelling Capacity, and Rheological Behavior for Effective Sand Production Control in Oil Reservoirs” Petroleum (2025) https://doi.org/10.1016/j.petlm.2025.07.010

13- Dastjani-Farahani, Raziyeh, Naser Asadzadeh, Arezou Jafari, Mohsen Vafaie-Sefti, and Mahsa Baghban-Salehi. “Enhancing xanthan hydrogels for water shutoff treatment in sandstone oil reservoirs through core flooding and CCD approach.” Scientific Reports 15, no. 1 (2025): 14016.

14- Salehi, Mahsa Baghban, Asefe Mousavi Moghadam, and Sedigheh Mahdavi. “Investigation of performance of dual crosslinked hydrogel by modified Zener model in high temperature reservoirs.” Chemical Engineering Communications 212, no. 4 (2025): 665-681.

15- Homa Etemadi Moghaddam, Mahsa Baghban Salehi. “Efficient Synthesis and Characterization of Antibacterial Xanthan Gum–Based Self-Healing Hydrogels: Conventional Versus Microwave Treated.” Polymers for Advanced Technologies 35, Issue12 (2024)e70029.

16- Harighi, Hooman, Mahsa Baghban Salehi, Vahid Taghikhani, and Mojtaba Mirzaei. “Optimizing Environmentally-Friendly oil Recovery: Synergies of Imidazolium-Based ionic liquids and carboxymethylcellulose hydrogels.” Journal of Molecular Liquids 415 (2024): 126320.

17- Najarbashi, Nima, Mahsa Baghban Salehi, Farzin Saghandali, Babak Mokhtarani, Mojtaba Mirzaei, and Ali Sharifi. “Evaluation of the synergistic effect of nanocomposite hydrogel based on imidazolium nitrate ionic liquids for enhanced oil recovery.” Fuel 377 (2024): 132811.

18- Saghandali, Farzin, Mahsa Baghban Salehi, Hossein Pahlevani, Vahid Taghikhani, Siavash Riahi, Mohammad Ebrahimi, Saeid Saviz, and Aras Roomi. “Fabrication of a hydrogel reinforced with titanium nanoparticles to reduce fine migration and remediation of formation damage during low-salinity waterflooding.” Geoenergy Science and Engineering 241 (2024): 213173.

19- Montazeri, Mostafa, Mahsa Baghban Salehi, Babak Fazelabdolabadi, and Saeed Golmohammadi. “QSPR study of viscoplastic properties of peptide-based hydrogels.” Journal of Biomolecular Structure and Dynamics 42, no. 13 (2024): 6577-6587.

20- Kia, Anahita Kazemi, Hamid Reza Mortaheb, Mahsa Baghban Salehi, and Ali Asghar Nozaeim. “Solvent extraction of lithium from brines with high magnesium/lithium ratios: investigation on parameter interactions.” Environmental Science and Pollution Research (2024): 1-17.

21- Pahlevani, Hossein, Mahsa Baghban Salehi, Farzin Saghandali, Rouzbeh G. Moghanloo, and Vahid Taghikhani. “Profile control and oil displacement in high temperature and salinity reservoirs: Evaluation of deformable microgel system.” Polymers for Advanced Technologies 35, no. 8 (2024): e6530.

22- Khademi, Farnoosh, Mahsa Baghban Salehi, Hamid Reza Mortaheb, Ali Asghar Nozaeim, and Seyyed Hamid Ahmadi. “Design and Fabrication of Co ([CHITOSAN-AMPS-AA]/PEI-MBA) Nanocomposite Hydrogel as an Effective Solution for Removing Tin and Platinum Ions in Wastewater Treatment Applications: Selective Recovery of Platinum.” Journal of Polymers and the Environment (2024): 1-18

23- Harighi, Hooman, Mahsa Baghban Salehi, and Vahid Taghikhani. “Investigating the Performance of Carboxymethyl Cellulose-based Hydrogel in Chemical Enhanced Oil Recovery.” Journal of Petroleum Research 34, no. 1403-2 (2024): 129-142.

24- Karchoubi, Fatemeh, Reza Afshar Ghotli, Hossein Pahlevani, and Mahsa Baghban Salehi. “New insights into nanocomposite hydrogels; a review on recent advances in characteristics and applications.” Advanced Industrial and Engineering Polymer Research 7, no. 1 (2024): 54-78.

25- Saghandali, F., Salehi, M. B., & Taghikhani, V. (2023). “Hydrogel nanocomposite network elasticity parameters as a function of swelling ratio: from micro to macro flooding”. Journal of Industrial and Engineering Chemistry. 125, 163-177.

26- Karchoubi, F., Baghban Salehi, M., Panahi, R., & Salemi Parizi, S. (2023). “Performance improvement of a modified copolymer as an antiscalant and microbial growth inhibitor”. International Journal of Polymer Analysis and Characterization, 1-16.

27- Saghandali, F., Salehi, M. B., & Taghikhani, V. (2023). “Design and fabrication of a Preformed Thixotropic-Viscoelastic Nanocomposite hydrogel system (PNCH) for controlling sand production in reservoirs”. Results in Engineering, 18, 101089.

28- Gohari, Roghayeh Mohafezatkar, Mehrnaz Safarnia, Ahmad Dadvand Koohi, and Mahsa Baghban Salehi. (2023). “Adsorptive removal of cationic dye by synthesized sustainable xanthan gum-g p (AMPS-co-AAm) hydrogel from aqueous media: Optimization by RSM-CCD model”. Chemical Engineering Research and Design 188: 714-728.

29- Saghandali, F., Salehi, M. B., & Taghikhani, V. (2023). ” Investigating the Performance of Co [AM-AMPS-MALEIC-AAC]/PEI-MBA Nanocomposite Hydrogel in Sand Control from Oil Reservoirs”. Journal of Petroleum & Petrochemical Engineering Journal. 7(2): 000347.

30- Radman Hosseinzadehsemnani, Mahsa Baghban Salehi, Babak Mokhtarani, Ali Sharifi, Mojtaba Mirzaei, Vahid Taghikhani, (2022). “Evaluation of the Interfacial Activity of Imidazolium-based Ionic Liquids and their Application in Enhanced Oil Recovery Process”. Journal of Molecular Liquids.

31- Farzin Saghandali, Mahsa Baghban Salehi, Radman Hosseinzadehsemnani, Rouzbeh Ghanbarnezhad Moghanloo and Vahid Taghikhani, (2022). “A review on chemical sand production control techniques in oil reservoirs.” Journal of energy & fuel 36, 10, 5185– 5208.

32- Roghiye Mohafezatkar Gohari, Mehrnaz Safarnia, Ahmad Dadvand Koohi, & Mahsa Baghban Salehi. (2022). “Adsorptive removal of cationic dye by synthesized sustainable xanthan gum-g p (AMPS-co-AAm) hydrogel from aqueous media: Optimization by RSM-CCD model”. Chemical Engineering Research and Design, 188, 714-728.

33- Farzin Saghandali, Mahsa Baghban Salehi, and Vahid Taghikhani, (2022). “Investigating the performance of Co[AM-AMPS-MALIC-AAC]/PEI-MBA nanocomposite hydrogel in controlling sand production from oil reservoirs”. Green Chemistry and Sustainable Technologies. 4.2: 12-21.

34- Farzad Aqcheli, Mahsa Baghban Salehi, Vahid Taghikhani, and Hossein Pahlevani., (2021). “Synthesis of a custom-made suspension of preformed particle gel with improved strength properties and its application in the enhancement of oil recovery in a micromodel scale.” Journal of Petroleum Science and Engineering, 109108.

35- Hamid Reza Mortaheb, Mahsa Baghban Salehi, and M. Rajabzadeh. “Optimized hybrid PVDF/graphene membranes for enhancing performance of AGMD process in water desalination.” Journal of Industrial and Engineering Chemistry 99 (2021): 407-421.

36- Elham Jafarigol, Reza Afshar Ghotli, Arvin Hajipour, Hossein Pahlevani, and Mahsa Baghban Salehi, (2021), “Tough dual-network GAMAAX hydrogel for the efficient removal of cadmium and nickle ions in wastewater treatment applications.” Journal of Industrial and Engineering Chemistry 94: 352-360.

37- Mohammad Ali Mousavi, Hamid Reza Mortaheb, and Mahsa Baghban Salehi. (2021), “Hydrophobizing polyether sulfone membrane by sol-gel for water 4 desalination using air gap membrane distillation.” Polymer-Plastics Technology and Materials 60.1: 47-59.

38- Maryam Edalatfar, Farshad Yazdani, and Mahsa Baghban Salehi, (2021) “Synthesis and identification of ZnTiO3 nanoparticles as a rheology modifier additive in water-based drilling mud.” Journal of Petroleum Science and Engineering, 108415.

39- Farzin Saghandali, Mahsa Baghban Salehi, and Vahid Taghikhani, (2021). “Investigating the performance of Co[AM-AMPS-MALIC-AAC]/PEI-MBA

nanocomposite hydrogel in controlling sand production from oil reservoirs.” Green Chemistry and Sustainable Technologies. 3.3: 1-9.

40- Elham Jafarigol, Mahsa Baghban Salehi, and Hamid Reza Mortaheb. (2020): “Preparation and assessment of electro-conductive poly (acrylamide-co-acrylic acid) carboxymethyl cellulose/reduced graphene oxide hydrogel with high viscoelasticity.” Chemical Engineering Research and Design 162 74-84.

41- Farzad Aqcheli, Mahsa Baghban Salehi, Hossein Pahlevani, and Vahid Taghikhani., (2020), “Rheological properties and the micromodel investigation of nanosilica gelreinforced preformed particle gels developed for improved oil recovery.” Journal of Petroleum Science and Engineering 192: 107258.

42- Mahsa Baghban Salehi, Asefe Mousavi Moghadam, Khosrow Jarrahian, (2020), “Effect of Network Parameters of Preformed Particle Gel on Structural Strength for Water Management” SPE Production and Operations Journal, 13(2). DOI: 10.2118/193631-PA,Document ID: SPE-193631-PA.

43- Jafarigol, Elham, Reza Afshar Ghotli, Arvin Hajipour, Hossein Pahlevani, and Mahsa Baghban Salehi, (2020). “Tough Dual-Network GAMAAX Hydrogel for The Efficient Removal of Cadmium and Nickle Ions in Wastewater Treatment Applications.” Journal of Industrial and Engineering Chemistry , https://doi.org/10.1016/j.jiec.2020.11.006.

44- Asefe Mousavi Moghadam and Mahsa Baghban Salehi., (2020), “Enhancing hydrocarbon productivity via wettability alteration: a review on the application of nanoparticles”, Reviews in Chemical Engineering, 35(4), 531-563.

45- Elham Jafarigol, Mahsa Baghban Salehi, Hamid Reza Mortaheb., (2020) “Preparation and assessment of electro-conductive poly (acrylamide-co-acrylic acid) carboxymethyl cellulose/reduced graphene oxide hydrogel with high viscoelasticity”, Chemical Engineering Research and Design, 162, 74-84.

46- Elham Jafarigol, Mahsa Baghban Salehi, Hamid Reza Mortaheb., (2020) “Synergetic effects of additives on structural properties of acrylamide-based hydrogel”, Journal of Dispersion Science and Technology, 1-10.

47- Behnam Sabzi, Arezou Jafari, , Mohammadreza Hasani, Mohsen Vafaei-Sefti, Zahra Fakhroueian, and Mahsa Baghbansalehi. (2020), “Surface modification of synthesized Fe 3 O 4 super-paramagnetic nanoparticles and performance investigation in gelation parameters enhancement: application in enhanced oil recovery.” Applied Nanoscience 10, no. 3: 955-969.

48- Farzad Aqcheli, Mahsa Baghban Salehi, Hossein Pahlevani, & Vahid Taghikhani, (2020), Rheological properties and the micromodel investigation of nanosilica gel-reinforced preformed particle gels developed for improved oil recovery.” Journal of Petroleum Science and Engineering, 107258.

49- Mohammad Ali Mousavi, Hamid Reza Mortaheb, & Mahsa Baghban Salehi, (2020). “Hydrophobizing polyether sulfone membrane by sol-gel for water desalination using air gap membrane distillation.” Polymer-Plastics Technology and Materials, 1-13.

50- Fatemeh Karchoubi, Mahsa Baghban Salehi, Hossein Pahlevani., (2019), “A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications”., Applied Research in Chemical – Polymer Engineering, Vol. 3, No.3 , page 3-38.

51- Majid Abedi Lenji, Masoud Haghshenasfard, Mahsa Baghban Salehi, Asefe Mousavi Moghdam, & Mohsen Vafaie Sefti, (2019). “Effect of Inorganic Polymer Gel Systems

on Residual Resistance Factor in Fractured Core Model”. Iranian Journal of Chemistry and Chemical Engineering (IJCCE), 38(4), 223-236.

52- Mahsa Baghban Salehi, Asefe Mousavi Moghadam, Samira Zargari Marandi, (2018), “Polyacrylamide hydrogel application in sand control with compressive strength testing”, Petroleum Science, 16(1), 94-104.

53- Sadegh Rahimi S, Mahmoud Habibian, Mahsa Baghban Salehi, (2018), “Effect of polymer molar mass and montmorillonite content on polymer flooding using a glass micromodel”, Applied Clay Science, 163, 186-195.

54- Cameliya Zareie, Mohsen Vafaie Sefti, Bahramian A,R, Mahsa Baghban Salehi (2019). “Network-gel strength relationship and performance improvement of polyacrylamide hydrogel using nano-silica; with regards to application in oil wells conditions”. Journal of Molecular Liquids, 278, 512-520.

55- Mahsa Baghban Salehi, Mina soliemanian, Asefe Mousavi Moghadam, (2018), “Examination of Disproportionate Permeability Reduction Mechanism on Rupture of Hydrogels Performance “, Colloids and Surfaces A Physicochemical and Engineering Aspects, 560:1-8.

56- Samira Zargari Marandi, Mahsa Baghban Salehi, Asefe Mousavi Moghadam. (2018),

“Sand control: Experimental performance of polyacrylamide hydrogels”. Journal of Petroleum Science and Engineering, 170, 430-439.

57- Majid Abedi Lenji, Masoud Haghshenasfard, Mohsen Vafaie Sefti, Mahsa Baghban Saleh, Aghdas Heydari, (2018). “Experimental study of swelling and rheological behavior of preformed particle gel used in water shutoff treatment”, Journal of Petroleum Science and Engineering, 169, 739-747.

58- Cameliya Zareie, Mohsen Vafaie Sefti, Bahramian A,R, Mahsa Baghban Salehi, (2018). “polyacrylamide hydrogel for application at high temperature and salinity tolerance in temporary well plugging”, Iranian Polymer Journal, 27(8), 577-587.

59- Arvin Hajipour, Mahsa Baghban Salehi, Mohsen Vafaie Sefti, Aghdas Heidari, (2018).

“Experimental study of polyacrylamide gel in close‐in well operation”, Polymers for Advanced Technologies, 29(4), 1278-1286.

60- Majid Abedi Lenji, Masoud Haghshenasfard, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Asefe Mousavi Moghadam, (2018), “Numerical modeling and experimental investigation of inorganic and organic crosslinkers effects on polymer gel properties”, Journal of Petroleum Science and Engineering, 160, 160-169.

61- Cameliya Zareie, Mohsen Vafaie Sefti, Bahramian A,R, Mahsa Baghban Salehi, “

Investigation of the performance of silica nanoparticles in increasing the strength polyacrylamide gel in oil well conditions”, Applied Research in Chemical-Polymer Engineering, 1(2):39-49.

62- Samira Rajaee, Mahsa Baghban Salehi, Asefe Mousavi Moghadam, Mohsen Vafaie Sefti, Shabnam Mohammadi, (2017). “Nanocomposite hydrogels adsorption: Experimental investigation and performance on sandstone core”, Journal of Petroleum Science and Engineering 159, 934 –941.

63- Mahsa Baghban Salehi, Delara Ehsani Sohi, Maryam Otadi, Majid Abedi Lengi, (2017). “Superabsorbent Sulfonated Polyacrylamide- Aluminum Nitrate Hydrogel: swelling, Mechanical, Thermal and Structural Properties”, Iranian Journal of Polymer Science and Technology, 30, 419- 433.

64- Aghdas Heidari, Mohsen Vafaie Sefti, Ebrahim Vasheghani-Farahani, Mahsa Baghban Salehi, Hasan Naderi, (2017), ” Disproportionate Permeability Reduction:

Performance of Preformed Particle Gel in Porous Media”, journal of Petroleum Research, 97, 142-154.

65- Shabnam Mohammadi, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Asefe Mousavi Moghadam, Samira Rajaee, Hasan Naderi, (2015), “Hydrogel Swelling Properties: Comparison Between Conventional and Nanocomposite Hydrogels for Water Shutoff Treatment”, treatment. Asia‐Pacific Journal of Chemical Engineering, 10(5), 743-753.

66- Samira Rajaee, Mohsen Vafaie Sefti, Asefe Mousavi Moghadam, Mahsa Baghban Salehi, Shabnam Mohammadi, Hasan Naderi, (2015), “Adsorption of Polyacrylamide Nanocomposite Hydrogels on Sandstone”, Journal of Oil, Gas and Petrochemical Technology 2 (1): 1-13 DOI:10.22034/JOGPT.2015.9486.

67- Asefe Mousavi Moghadam, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Ahmad Dadvand Koohi, Hasan Naderi, “Modeling the gelation time of sulfonated polyacrylamide/chromium triacetate hydrogel based on screening of the effective parameters”, Journal of Modeling in Engineering, 13(41), 159-172.

68- Asefe Mousavi Moghadam, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Hasan Naderi, (2014), “Bulk and Rheological Properties of Hydrogels used for Water Shutoff Treatment”, Korean Journal of Chemical Engineering, 31(3), 532-539.

69- Mahsa Baghban Salehi, Ebrahim Vasheghani-Farahani, Mohsen Vafaie Sefti, Asefe Mousavi Moghadam, (2014), “Rheological and Transport Properties of Sulfonated Polyacrylamide Hydrogels for Water Shutoff in Porous Media”, Polymers for Advanced Technologies, 25 (4): 396-405.

70- Mahsa Baghban Salehi, Mohsen Vafaie Sefti, Ebrahim Vasheghani-Farahani, Asefe Mousavi Moghadam, (2014), “Effect of Process Variable on the Gelation Time of Sulfonated Polyacrylamide Nanocomposite Hydrogel”, Journal of Dispersion Science and Technology, 35:663–671.

71- Asefe Mousavi Moghadam, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Ahmad Dadvand Koohi, Mehdi Sheykhan, (2012), “Effect of Nanoclay along with other Effective Parameters on Gelation Time of Hydro Polymer Gels”, Journal of Macromolecular Science, Part B: Physics, 51(10): 2015-2025.

72- Majid Abedi Lenji, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Asefe Mousavi Moghadam, Hasan Naderi, (2012), “Gelation Time of Hexamethylenetetramine Polymer Gels Used in Water Shutoff Treatment”, Journal of Petroleum Science and Technology, 2(2): 3-11, DOI: 10.22078/JPST.2012.103.

73- Asefe Mousavi Moghadam, Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Ahmad Dadvand Koohi, (2012), “Preformed Particle Gel: Effects of Salinity and pH on Equilibrium Swelling Ratio”, Journal of Petroleum Exploration and Production Technology, 2: 85-91.

74- Mahsa Baghban Salehi, Mohsen Vafaie Sefti, Asefe Mousavi Moghadam, Ahmad Dadvand Koohi, (2012), “Study of Salinity and pH Effect on Gelation Time of Polymer Gel Using in Water Shut-off with Central Composite Design Method”, Journal of Macromolecular Science, Part B: Physics, 51(3): 438-451.

75- Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Hasan Naderi, Mohammad Simjoo, (2009), “Modeling and investigation of The Performance of Gel Polymer in Porous Media”, Journal of Modeling in Engineering, 7(16), 55-70.

76- Mohsen Vafaie Sefti, Mahsa Baghban Salehi, Hasan Naderi, Seyed Reza Hasheminasab Zavare, (2008), “Modeling and investigation of The Effects of Gel

Polymer Injection to an Iranian oil reservoir”, Iranian Journal of Chemistry & Chemical Engineering, 26(4).

77- Mohsen Vafaie Sefti, Hasan Naderi, Mahsa Baghban Salehi, Seyed Reza Hasheminasab Zavare, (2008), “Experimental Study of the Polymer Gel in order to Prevent Water from Oil Production Wells”, Iranian Journal of Chemistry & Chemical Engineering, 27(2).